RL3030 is small size eas rf label with size 30*30mm. These RF label is the same frequency (8.2 MHz) as Checkpoint Labels.
EAS rf label RL3030's smaller dimensions allow for tagging on smaller packaged items or hangtags, but it also has a lesser detection rate than their counterparts the 4x4cm labels.
Size –30*30 mm
Frequency – 8.2 MHz
Available in Plain White, Barcode, and Thermal Paper.Custom Printing is available
Number of Labels per Roll –1000pcs/roll,2000pcs/roll
eas rf label RL3030 is used by retailers and manufacturers worldwide to protect their products from theft.
8.2 mhz security label is well suited for durable non-metallic product.
anti theft sticker RL3030 is well suited for durable non-metallic product.Whether you want visible labels for general merchandise, clothing, health and beauty, or integrated solutions for shoes or prtecting fresh or forzen food.
eas rf label RL3030 can be used for source tagging, which is the process of embedding labels inside of retail merchandise at the point of manufacture or packaging.
How to use rf security stickers?
For applying the label the surface must be free from dirt, grease dust etc.
The label must be placed flat and not creased etc.
Deactivation for 8.2MHz label tags is typically achieved using a deactivation pad.
At the point-of-sale the rf alarm sensor are quickly and permanently deactivated with the use of an RF label Deactivator.
Deactivation of rf alarm sensor is also dependent on the size of the label and the power of the deactivation pad (the larger the label, the greater the field it generates for deactivation to take place. For this reason very small labels can cause issues for consistent deactivation). It is common to find RF deactivation built into barcode flat and vertical scanners at the POS in food retail especially in Europe and Asia where RF EAS technology has been the standard for nearly a decade. In apparel retail deactivation usually takes the form of flat pads of approx. 30x30 cm in retail apparel environments.
The higher Q of our eas rf label RL3030 provides comparable detection to 40 x 40mm labels. The higher Q enables the label to interact with deactivator sooner increasing the height from the counter at which the label is deactivate.
Efficiency is an important factor when choosing an overall EAS solution given that time lost attempting to deactivate eas rf label an be an important drag of cashier productivity as well as customer satisfaction if unwanted alarms are caused by tags that have not been effectively deactivated at the point of sale.
A reliable Loss Prevention program starts with quality reliable Electronic Article Surveillance (EAS) labels and tags.
Our products are 100% tested,nsure your Loss Prevention is effective. we can provide our products in a variety of formats to meet your needs and we can inventory your specific product to meet your delivery schedules.
R33 is 8.2mhz rf soft label with size of dia 33mm. It is vailable in Plain White, Barcode, and Thermal Paper.
These type of rf soft label can be fully customized, as the colour you prefer and printed with your own text or logo.
All 0ur RF labels including R33 are available in a variety of formats; deactivatable, non-deactivatable, barcode, plain white, black, custom color, permanent adhesive, removable adhesive, thermal, and custom printed. We also offer custom roll lengths to better service your unique labeling applications.
these rf security lable can also protect their products from theft with EAS retail security system.
A reliable Loss Prevention program starts with full EAS (Electronic article surveillance) secueity solution, includes quality reliable rf soft label, eas security tags, RF label reader, EAS anti theft system.
These rf anti theft security labels are perfect for protecting non-metallic product.
It can be used to protect general merchandise, clothing, health and beauty, or integrated solutions for shoes or prtecting fresh or forzen food.
The rf smaller lsize of the rf soft label R33 allow for tagging on smaller packaged items or hangtags. But this rf anti-theft sticker also has a lesser detection rate than their counterparts the 4x4cm labels.
The 4x4cm is by far the most commonly used label similar to a small unbranded security tag.
The best detection labels are the 5x5cm and 3x6cm labels, these have a similar detection to a small-mini sized hard tag.
To make sure the right to use rf stickers, please apply the label the surface must be free from dirt, grease dust. The label must be placed flat and not creased etc.
Deactivation for 8.2 MHz label tags is typically achieved using a deactivation pad.
These rf anti theft security labels are compatible with Checkpoint and all other Radio-Frequency (RF) EAS systems and deactivators.
These rf soft label can be used for source tagging.
these store sensors are the process of embedding labels inside of retail merchandise at the point of manufacture or packaging. At the point-of-sale the labels are quickly and permanently deactivated with the use of an RF label Deactivator.
All our rf soft labels are 100% tested to ensure quality.
Our products support a range of RF frequencies including 8.2 MHz, support and are compatible with all Checkpoint Electronic Article Surveillance (EAS) Systems and Label Deactivators and Sensormatic EAS Detection Systems and Security Tag Detachers.
RL4040-clear is clear RF label of size 40*40mm. These clear radio frequency sensor can be clear so that the product branding is uncovered, or the product branding can be printed on a white top paper.
The main parameters are as follows:Frequency: 8.2MHz±0.2;Amplitude: Q≥80 Effective Volume: ≥ 2400;Operating Distance: 1.5 – 1.8m (0.9-1m for mono system);Deactivation Distance: 10 cm -18 cm ( 3.94' - 7.09' ).
Produced in the industry standard 40*40mm,radio frequency sensor RL4040-Clear can be used across a wide variety of products and applications.
Clear RF label 40*40mm is known throughout the retail security world as a top performer with its ability to securely adhere to many products. And its High Q factor 80 which in turn results in better detection on all 8.2MHz EAS systems.
These security sticker tags RL4040-clear are compatible with many top manufacturers of EAS RF systems such as:Cross Point, Checkpoint, Ketec, Lucatron and Shopguard Systems.
Primarily for applying by hand retailers and vendors can utilize this label, in distribution centers and when tagging products in store, and be confident their goods are protected. Commonly used to protect: Liquor bottles, Fragrance, Pharmacy goods, Beauty supply, Packaged goods, Groceries
radio frequency sensor RL4040-Clear are available in a variety of formats; deactivatable, non-deactivatable, permanent adhesive, removable adhesive, thermal, and custom printed. We also offer custom roll lengths to better service your unique labeling applications.
rf soft label RL4040-Clear's average Q is 80μ. This higher Q enables the label to interact with rf label deactivator sooner increasing the height from the counter at which the label is deactivated.
RF anti theft security labels are well suited for durable non-metallic product.
our range of rf soft labels are diverse to meet your requirements. Whether you want visible labels for general merchandise, clothing, health and beauty, or integrated solutions for shoes or prtecting fresh or forzen food.
All our eas rf labels are 100% tested to ensure quality.
How to use rf sticker labels ?
For applying the radio frequency sensor to the surface must be free from dirt, grease dust etc. The rf soft label must be placed flat and not creased etc. All RF security sticker tags must NOT Be placed around any metallic, electrical goods. And all these rf soft labels should be placed where there is no metallic product as this will severely impede the detection.
A reliable Loss Prevention program starts with full EAS (Electronic article surveillance) secueity solution, includes quality reliable rf labels, eas security tags, RF deactivator, EAS retail security gate.
rf sticker labels is used by retailers and manufacturers worldwide to protect their products from theft.
RL4040-white is rf sticker labels of size 40*40mm, white color. This 40*40mm RF label is most widely used security label.
Features: Size 40mm*40mm;Frequency: 8.2MHz±0.2;Amplitude: Q≥80 Effective Volume: ≥ 2400;Operating;Distance: 1.5 – 1.8m (0.9-1m for mono system);Deactivation Distance: 10 cm -18 cm ( 3.94' - 7.09' )
The Alien-security rf sticker labels deliver dependable performance and merchandise protection using RF technology. These labels are the same frequency (8.2 MHz) as Checkpoint Labels.
Our 40*40mm 8.2 mhz security labels are available in a variety of formats.
Tese RF labels can be deactivatable, non-deactivatable, barcode, plain white, black, custom color, permanent adhesive, removable adhesive, thermal, and custom printed. We also offer custom roll lengths to better service your unique labeling applications.
The rf sticker labels RL4040-white's average Q is 80μ. This higher Q enables the label to interact with deactivator sooner increasing the height from the counter at which the label is deactivated.
eas rf label is well suited for durable non-metallic product.
our range of rf alarm sensor are diverse to meet your requirements. Whether you want visible labels for general merchandise, clothing, health and beauty, or integrated solutions for shoes or prtecting fresh or forzen food.
All our rf sticker labels are 100% tested to ensure quality.
How to rf sticker labels ?
For applying the radio frequency sensor to the surface must be free from dirt, grease dust etc. The? anti theft sticker must be placed flat and not creased etc.? All RF security sticker tagsmust NOT Be placed around any metallic, electrical goods. And all these? rf sticker labels should be placed where there is no metallic product as this will severely impede the detection.
A reliable Loss Prevention program starts with full EAS (Electronic article surveillance) secueity solution, includes quality reliable rf labels, eas security tags, RF deactivator, EAS security gates.
Our Alien-security rf sticker labels are compatible with Checkpoint and all other Radio-Frequency (RF) EAS systems and deactivators.These rf labels can be used for source tagging, which is the process of embedding labels inside of retail merchandise at the point of manufacture or packaging. At the point-of-sale the anti theft stickers are quickly and permanently deactivated with the use of an RF Deactivator.
[prisna-google-website-translator]
Open chat
1
Scan the code
High Security Retail Solution Expert
Hello 👋 Welcome to Alien-security, a specialist in high security retail solutions! What can we help you please?
